| Operational Status | ● Online | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Description |
Dicing saw "A" is operational. If you have been trained to use the saw but can't make reservations, check with John Abrahams to be reauthorized. Note: If you need to coat with Photoresist you will need to reserve a spin station for at least 15 minutes, If you are cleaning afterwards, reserve solvent bench for at least 15 minutes. This fully programmable dicing saw can be used for precision cutting of wafer-sized substrates, including silicon, III-V materials, quartz, Pyrex and similar materials. For training on the saw, please contact Dr. Daniel Lewis at dlewis17@umd.edu |
|||||||||||||||
| Location | FabLab | Dicing Room | |||||||||||||||
| Manufacturer |
|
|||||||||||||||
| Staff Contact |
 Daniel Lewisdlewis17@umd.edu 301-405-5018 |
|||||||||||||||
| Rates | No Charge $0/hr Large Commercial $150/hr Small Commercial / MTECH $64/hr External Non-profit / University $44/hr UMD $28/hr |
|||||||||||||||
| Reservations |
|
|||||||||||||||
| Logs |
|
|||||||||||||||
| SOPs |
|
|||||||||||||||
| Manuals | You must have lab permissions to view the manuals. Please login to view manuals or contact the lab staff to obtain permissions. |
|||||||||||||||
| Recipes |
